一、物化性能
主要成分 特殊的改性季铵盐
外观 黄色液体
含固量 80%
PH值 6-8
离子性 阳离子
二、使用方法
建议稀释至5-10倍后使用
稀释方法：加入水至60℃—搅拌加入 Thor —搅拌下保温60℃,30min
—降温至40℃以下过滤即可
.浸渍工艺
稀释后用量：2-3%（owf）
浸渍（20-40min）—脱水—焙烘（120-170℃）
.浸轧工艺
稀释后用量：20-40g/L
一浸一轧（或二浸二轧）（轧余率70%左右）—焙烘（120-170℃）具体工艺请用户通过试样的情况调整
贮 存
非危险品，常温避光，密封保存贮存期6个月，125公斤/桶
温馨提示：本网站所展示单价均为200g 小样运费，各产品实际单价待确认要求后报价。
Antistatic Finishing Agent
HOLPOSON® Thor
Antistatic finishing agent Thor is suitable for the antistatic of synthetic and natural fiber; specially modified quaternary ammonium salt has stable performance, and can be used in the same bath with most types of silicone oil, which does not affect the fabric style. It has excellent moisture absorbency, electric conductivity and pollution/dust resistance.
Physical & chemical properties:
Appearance: Yellow liquid
Solid content: 80%
pH: 6-8
Ionicity: Cationic
Usage:
It is re*mended to use it after diluting it 5-10 times.
Dilution method: Add water at 60 ℃ - stir and add Thor - keep at 60 ℃ while stirring for 30min
- lower the temperature to below 40 ℃ and filter.
Impregnation method
Dosage after dilution: 2-3% (o.w.f.)
Impregnation (20-40min) - dehydration - baking (120-170 ℃)
Padding method
Dosage after dilution: 20-40g/L
Dip and roll once or dip and roll twice (Liquid rate: 70%) - baking (120-170 ℃) To be more specific, please adjust through the sample test.
Storage:
1. Non-hazardous substance. Please protect it from light at normal temperature
2. Storage time when sealed: 6 months
3. 125kg/barrel
ALICE