上海骏赛包装机械有限公司  

联系电话: 刘璐 021-51870016 13564342156

上海市青浦区白鹤镇外青松公路2563号

(吸塑机)的特点:(Characteristic)

1.        温控系统：1000份数码式炉温控制（1000档），全时恒定功率，附电压补偿，当电压波动±20%内时，即补偿误差±1%。解决电压波动，所以炉温可长期保持稳定。数码控制，适合ISO9001操作体系。炉温可恒温设定；(Controls the system warm: 1000 digital type furnace temperature control (1000 grades), the entire time constant power, attaches the voltage *pensation, when voltage hunting in ±20%, namely *pensating errors ±1%. Solution voltage hunting, therefore the furnace temperature may maintain stable for a long time. The digital control, suits the ISO9001 operation system. The furnace temperature may the constant temperature hypothesis)
2.        冷风系统：风速大小可调，附刹车装置，适合不同厚薄片材。杀车装置、无震动及余风，增加生产速度;(Cold wind system: Wind speed size adjustable, attaches the brake system, suits the different thickness sheet material. Kills the vehicle installment, not to have the vibration and the remaining influence, increases the output velocity)
3.        数码式拉片：可任意改变速度及长度，拉片长短特别准确。按数字键即可改变拉片长度（1mm）;(The digital type pulls the piece: May change the speed and the length willfully, pulls the piece length to be specially accurate. Then changes according to the numeric keyboard pulls the piece length (1mm))
4.        美式合金铝轨道及筒链条，摩擦系数小及无震动;(The American alloy aluminum track and the tube chain link, the friction coefficient small and does not have the vibration)
5.        人机介面微电脑触摸屏控制系统，操作直观易用;(The man-machine interface micro*puter touchscreen control system, the operation direct-viewing easy to use)
6.        10.4寸触摸屏显示及操作.(10.4 inch touchscreen demonstrations and operation)

微电脑数码恒温式吸塑成型机(吸塑机)的技术参数：

如设计所需以上吸塑机参数如有更改，不另行通知。

◆交付方式：江浙沪地区送货至客户所在地，其他地区需支付少量运费。

◆培训计划：免费培训直至使用技术员完全掌握

◆保修期：免费一年保修

◆安 装：仅需电源插座及气源

售后服务:所有设备均一年内免费保修,随通知随安排理念24H小时内到位.有专人进行售后服务及跟踪。我司负责运输设备,江浙沪内送货上门.外省使用货运运输.木箱包装,设备及模具均调试OK,折箱即可使用. 客服人员: 021-51870016 刘小姐