杜邦PA6 Minlon 73M30 产品特性：各向异性，含30%矿物填充，热稳定，低翘曲，可超声波焊接，抗弯曲
我公司提供的产品均为正牌塑胶原料，品质保证，货源稳定，送货上门，可免费提供官方物性表、UL黄卡，并随货提供RoHS报告、SGS报告等，索取权威资料请致电13268582149
PA6 73M30 物性表：
| Physical | Dry | Conditioned | Unit | Test Method |
| Density | 1.35 | -- | g/cm³ | ISO 1183 |
| Molding Shrinkage | ISO 294-4 | |||
| Across Flow: 2.00 mm | 0.90 | -- | % | |
| Flow: 2.00 mm | 0.90 | -- | % | |
| Water Absorption (Saturation, 23°C) | 6.3 | -- | % | ISO 62 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 2.1 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
| Tensile Modulus (23°C) | 4800 | 1700 | MPa | ISO 527-2 |
| Tensile Stress (Break, 23°C) | 82.0 | 55.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 15 | 40 | % | ISO 527-2 |
| Tensile Creep Modulus (1 hr) | -- | 1180 | MPa | ISO 899-1 |
| Tensile Creep Modulus (1000 hr) | -- | 740 | MPa | ISO 899-1 |
| Flexural Modulus (23°C) | 4800 | 1800 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 3.5 | 3.5 | kJ/m² | |
| 23°C | 5.5 | 11 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | 85 | 85 | kJ/m² | |
| 23°C | 110 kJ/m² | No Break | ||
| Notched Izod Impact Strength | ISO 180/1A | |||
| -30°C | 4.0 | -- | kJ/m² | |
| 23°C | 5.5 | 9.0 | kJ/m² | |
| Thermal | Dry | Conditioned | Unit | Test Method |
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 196 | -- | °C | ISO 75-2/B |
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 78.0 | -- | °C | ISO 75-2/A |