| POM N2320-U03 德国巴斯夫公司 物性数据 |
| 规格级别： | 注塑级 | 外观颜色： | --- |
| 用途概述： | --- | ||
| 备注说明： | --- | ||
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
| 基本性能 | 熔融指数 | 220℃/10kg | --- | 7.5 | cm3/10min |
| 吸水率 | --- | --- | 0.8 | % | |
| 吸湿率 | --- | --- | 0.2 | % | |
| 密度 | --- | --- | 1400 | Kg/cm3 | |
| 物理性能 | 模缩率 | 水平方向 | --- | 2.1 | % |
| 机械性能 | 拉伸模量 | --- | --- | 2600 | MPa |
| 拉伸屈服强度 | --- | --- | 63 | MPa | |
| 屈服伸长率 | --- | --- | 9.6 | % | |
| 断裂伸长率 | --- | --- | 29 | % | |
| 拉伸模量 | 1h | --- | 1800 | MPa | |
| Charpy冲击强度 | 23℃ | --- | 200 | KJ/m | |
| Charpy冲击强度 | 23℃ | --- | 5.5 | KJ/m | |
| 电气性能 | 介电常数 | 100HZ | --- | 3.8 | --- |
| 体积电阻率 | --- | --- | 1E13 | ohm | |
| 表面电阻率 | --- | --- | 1E13 | Ohm | |
| 介电强度 | --- | --- | 40 | Kv/mm | |
| 热 性 能 | 线膨胀系数 | 水平方向 | --- | 1.1 | E-4/℃ |
| 燃烧率 | 1.6mm | --- | HB | Class | |
| 熔点 | 10℃/min | --- | 167 | ℃ | |
| 热变形温度 | 1.80MPa | --- | 105 | ℃ | |
| 维卡软化温度 | 50℃/h50n | --- | 150 | ℃ | |
| 其它性能 | 氧指数 | --- | --- | 15 | % |
| 损耗角 | 100HZ | --- | 10 | --- | |