三菱PC Iupilon S3000UR 特性：电气绝缘 良好的着色性能 尺寸稳定 良好的抗冲击性 易脱模 良好的抗紫外线性能 耐候性 透明 高耐热性 低粘度 无毒 自熄
用途：汽车领域用 电气/电子应用 医疗器械 光学应用 体育用品
我公司提供的产品均为正牌塑胶原料，品质保证，货源稳定，送货上门，可免费提供官方物性表、UL黄卡，并随货提供RoHS报告、SGS报告等，索取权威资料请致电13268582149
PC S-3000UR 物性表：
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Density | 1.20 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 16 | g/10 min | ISO 1133 |
| Melt Volume-Flow Rate (MVR) (300°C/1.2 kg) | 16.0 | cm³/10min | ISO 1133 |
| Molding Shrinkage - Flow (3.00 mm) | 0.50 to 0.80 | % | ASTM D955 |
| Molding Shrinkage - Across Flow (3.00 mm) | 0.50 to 0.80 | % | ASTM D955 |
| Molding Shrinkage | ISO 294-4 | ||
| Across Flow | 0.50 to 0.70 | % | |
| Flow | 0.50 to 0.70 | % | |
| Water Absorption (24 hr) | 0.25 | % | ASTM D570 |
| Water Absorption (23°C, 24 hr) | 0.24 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
| Tensile Modulus | 2400 | MPa | ISO 527-2 |
| Tensile Strength (23°C) | 62.2 | MPa | ASTM D638 |
| Tensile Stress (Yield) | 62.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield) | 6.7 | % | ISO 527-2 |
| Tensile Elongation (Break, 23°C) | 120 | % | ASTM D638 |
| Nominal Tensile Strain at Break | 120 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 2300 | MPa | ASTM D790 |
| Flexural Modulus | 2300 | MPa | ISO 178 |
| Flexural Strength (23°C) | 85.3 | MPa | ASTM D790 |
| Flexural Strength | 93.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
| Charpy Notched Impact Strength (23°C) | 67 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C) | No Break | ISO 179 | |
| Notched Izod Impact (3.20 mm) | 870 | J/m | ASTM D256 |
| Hardness | Nominal Value | Unit | Test Method |
| Rockwell Hardness | ASTM D785 | ||
| M-Scale | 65 | ||
| R-Scale | 123 | ||
| Thermal | Nominal Value | Unit | Test Method |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 150 | °C | ASTM D648 |
